ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML150 G3 Raid controller setup error

 
Romance Bamboo
Occasional Visitor

ML150 G3 Raid controller setup error

SAS Raid 0 configuration setup, when install MS Server 2003 with USB floppy support, after F6 then shows floppy drive and after that
error shows;

"File txtsetup.oem caused an expected error (32768) at line 1896 in d:\srvrtm\base\boot\setup\oemdisk.c."

any help pls! tnx
4 REPLIES
chongkan
Trusted Contributor

Re: ML150 G3 Raid controller setup error

Replace the floppy disk, you're getting this error due to a corrupted file.

You have to perform a COMPLETE format to the floppy disk before loading the drivers on it.

Hope it helps!
Romance Bamboo
Occasional Visitor

Re: ML150 G3 Raid controller setup error

I tried but still error msg exists.

Is it possible that the external floppy may have been the problem?

If that would be the cause, what will be the alternative drive to setup the controller?

Thank you very much.
Rajashekar Chintakunta
Honored Contributor

Re: ML150 G3 Raid controller setup error

Hi Romance Bamboo,

Create a new setup CD which has the driver integrated. You can use nLite (www.nliteos.com) for this purpose.

Regards,
Raj.
Romance Bamboo
Occasional Visitor

Re: ML150 G3 Raid controller setup error

How and where should the drivers to be saved inside server 2003 installation cd?

Tnx..

Btw, can i use or add IDE hdd to setup first then update all the drivers?