ML150 G5 RAID CONTROLLER

[MARIO TASSOS]

Hi,
i have proliant ml150 g5 with two 250gb hard disks and i am having problem when i try to install the server with windows 2003,setup could not find any hard disk drives.
I have configure the controller as raid0 and when start the windows setup put the f6 button and load the sas/scsi drivers from a floppy disk but i am having the some problem.
Please can be helpme because i don't now what else to do?

Thanks
Mario

[KarloChacon]

hi

is the server using the Embedded controller? SATA Embedded?

which driver are you using?

is this the one?
HP Embedded G5 SATA RAID Controller Driver for Windows Server 2003
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3577708&prodNameId=3577715&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-1af9deb2dde346e78892d0e1b4


just in case sometimes floppy is a headache
use nlite instead

www.nliteos.com

bye