ML150 G5 SATA Raid Driver installation

[Nigel Harper]

I've enabled the RAID feature of the embedded SATA controller from within the BIOS. I've Created a RAID1 array from withing the SATA Disk utility & made it bootable.
When installing Win SBS 2k3R2 OEM I've press F6 to allow for the loading of harddisk drive controller drivers and it wants me to put the disk in drive A: !!!
The G3 doesn't have a floppy drive controller and I've downloaded the drivers onto and USB Memory stick. Any ideas? No I don't have a USB floppy drive and I'm not sure it would be configured as drive A: even if I had, since the memory stick certainly isn't recognised as such.

[Nigel Harper]

Hey - I Bit the Bullet

Just bought a USB floppy - worked a treat, and for this one-off job quicker than getting to grips with a streamlined installation.

Problem solved.