ProLiant Servers (ML,DL,SL)
1748165 Members
3775 Online
108758 Solutions
New Discussion

ML150 G6 hot-swap caddy/tray?

 
MrMister007
Collector

ML150 G6 hot-swap caddy/tray?

Hi there,

 

I have to upgrade hard drives, but I accidentally bought a non-hot swap hard drive. I wish to install it without too much hassle into the hot-swap enclosure on my machine, but I need a tray/caddy to hold it. Which tray/caddy will fit into the ML150 G6?

 

I have found part number 

373211-001

on Amazon. It says in the description that it will work with my machine, but after contacting support, they said it will only work with the ML350 G6. Is there a corresponding part I can purchase for the 150, or will it fit?

 

Thank You.

1 REPLY 1
Goutham_Sabala
Esteemed Contributor

Re: ML150 G6 hot-swap caddy/tray?

Should work looking at various sites for compatibility with the server and caddy looks like it will work, I could not find any HP doc that could verify this fact
Was the post useful? Say thanks by clicking the white KUDOS Star!
Goutham Sabala