ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML150 G6 will not boot with second cpu

SOLVED
Go to solution
nixvitae
Occasional Visitor

ML150 G6 will not boot with second cpu

I recently tried to upgrade our ML150 G6 with a second cpu + RAM (XEON E5502 1.86GHZ-2X2MB KIT ML150 G6) same processor & RAM config as originaly in the ML150.
With 2 processors, it will not post.
with either processor and/or either RAM in CPU pos.1 it posts fine.
Updating BIOS did not help.
What am I missing?
4 REPLIES
marcus1234
Honored Contributor
Solution

Re: ML150 G6 will not boot with second cpu

look on page 25 for 2 cpu the options for ram slots
need to be correct or it will not boot

http://h18004.www1.hp.com/products/quickspecs/13249_na/13249_na.pdf

enjoy points appreciated

http://forums11.itrc.hp.com/service/forums/helptips.do?#33
marcus1234
Honored Contributor

Re: ML150 G6 will not boot with second cpu

nixvitae
Occasional Visitor

Re: ML150 G6 will not boot with second cpu

Dear mark1234,

I will "thank" you the forum way as soon as I have confirmed that your solution/suggestion works.
It seems likely it will work (the ram I have turned out to be mixed registered and unregistered).
New ram is ordered but not yet delivered. Hope to be able to thank you later this week ;)

Until then...

Thx :)

/Nix
nixvitae
Occasional Visitor

Re: ML150 G6 will not boot with second cpu

Works fine now that RAM is of same type.

Thanks HP for sending mixed R & E DIMMs :(

Thanks mark1234 for bringing memory configuration to my attention :)

/N