ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML150 G6 with P410 controller - No RAID config

mvuelma
Occasional Visitor

ML150 G6 with P410 controller - No RAID config

Does anyone know if I can disable the RAID function of the above controller? I need to use 3 independent disks.
Thanks.
5 REPLIES
Michal Kapalka (mikap)
Honored Contributor

Re: ML150 G6 with P410 controller - No RAID config

hi,

you could try to create 3 single RAID0, it should be the same, the JBOD ( just bundle of disk ) isn't supported, but ectually i am not sure if there is limit of number of RAIDs = 2 ???.

mikap
mvuelma
Occasional Visitor

Re: ML150 G6 with P410 controller - No RAID config

Thanks Mikap.
But I dont´t want to use one single volume with 3 disks. I want to use 3 disks independent. Have you any idea?

Marta

Re: ML150 G6 with P410 controller - No RAID config

Boot into the ACU array config utility from a smartstart cd, that should let you configure the 3 disks individually if that is whats desired.

Hope that helps.
mvuelma
Occasional Visitor

Re: ML150 G6 with P410 controller - No RAID config

Daniel
Unfortunatelly it doesn´t works. I made several contacts with server support and I discovered that this controller only works with RAID 0 (or other types of RAID). In RAID 0, if I choose only 1 disk, my choice cause the controller doesn´t recognize the remaining disks.
Thanks.
Marta
marcus1234
Honored Contributor

Re: ML150 G6 with P410 controller - No RAID config

individual disks cannot be configured i can confirm this , only option is external disks too,