cancel
Showing results for 
Search instead for 
Did you mean: 

ML150 G6

John Per
Occasional Visitor

ML150 G6

Hi, i have a Ml 150g6 with a ddr of 2gb and im trying to install another 1 but the result is that the system either does not boot after some beeps or it boots and gives an error 101 unsupported memory population.
Thanks
3 REPLIES
Michal Kapalka (mikap)
Honored Contributor

Re: ML150 G6

hi,

there are some rules how to add memory to the sevrer in vhich slot and also how many modules should be installed.

mikap

Re: ML150 G6

Hi,

Check below link for quick specs for ML150 G6server, hope it will resolve ur issue,
http://h18004.www1.hp.com/products/quickspecs/13249_div/13249_div.HTML#Memory

This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Regards.
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
Anuar Obregón
Frequent Advisor

Re: ML150 G6

Hello John,

You can use HP Memory Configuration Tool to check valid memory population in your server.

http://h18000.www1.hp.com/products/servers/options/tool/hp_memtool.html