ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML150 and windows2003

EnricoS_1
Occasional Visitor

ML150 and windows2003

Hi all!

How can I make a clean install of windows2003 on a ML150 Proliant server?

Many thanks

Enrico
5 REPLIES
ramesh_naik_
Esteemed Contributor

Re: ML150 and windows2003

Hi Enrico,

Few questions here:
1. What is the generation of the server?
2. What is the controller that is being used?
3. Is it a SATA or a SCSI model server?

This link might help you installing the OS on a SATA model:
http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=969559

Regards,
rmn
hObbeS_1
Occasional Visitor

Re: ML150 and windows2003

Hi there,

I'm having the same problem. My server is a ProLiant ML150 G3 series. I'm trying to install a Windows 2003 server but it doesn't seems to detect the hard disk even after i load the LSI driver from the F6 option. Your advice is much important tp me. thank you
ramesh_naik_
Esteemed Contributor

Re: ML150 and windows2003

HObbes,

You may want to refer this for the ML150 G3 installation:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1070140

Hope this works!!!!

Regards,
rmn
hObbeS_1
Occasional Visitor

Re: ML150 and windows2003

Hello Ramesh,

Thanks for that feedback, i've seen that topic but it doesn't work for my case. But i already can proceed for the installation. I did a format on the hard drive with the LSI Ultility and try again and it works. Weird but it works, heh. But neway thanks alot for, appreciated it.



Good day,
hObbeS
Enrico1S
Occasional Visitor

Re: ML150 and windows2003

Hi ramesh_naik_!

I have a ml150 G2 server and I use the scsi controller. I tried the driver on the hp site, but in this way I can only install Windows2003 again and I cannot format the SCSI disk. There is a SmartstartCD that works with my system (the 7.60 do not support it)?

Thanks for the answer!

Enrico