ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML150 serial number

Edgar Delgado
Occasional Contributor

ML150 serial number

Hi everybody,

Recently I installed 30 ml150 servers, but I forgot take note about each one serial numbers. How can I retrieve those serial numbers remote way?.

Thanks in advance.


11 REPLIES
avizen9
Esteemed Contributor

Re: ML150 serial number

Hello,
i dont think its possible to get Sr. no remotely.

can you try systeminfo command which will show you product id and other info, but i belive it will not show you sr no.
Aaron Wolski
Valued Contributor

Re: ML150 serial number

I know that you can get the serial number through HP Insight Diagnostics Online Edition but I'm not sure that the software is compatible with the ML150. I think the G5 shipped with the Offline Edition. I'm guessing that would hardly help you retrieve the sn in a "remote way".
avizen9
Esteemed Contributor

Re: ML150 serial number

"I know that you can get the serial number through HP Insight Diagnostics Online Edition"

in this case Edgar Delgado please call to HP regarding this you may get some help,
Cederberg
Honored Contributor

Re: ML150 serial number

Hi.

If you don't mind loggin in to all the servers you should be able to run the "wmic csproduct list" command in CMD..
avizen9
Esteemed Contributor

Re: ML150 serial number

hello Cederberg

" run the "wmic csproduct list" command in CMD"

thank i was not aware about this, this is good information for me also, thanks again to share here, :)
Eliran Hayun
Occasional Visitor

Re: ML150 serial number

You can do it all from yours pc if you will use PsTools- http://technet.microsoft.com/en-us/sysinternals/bb896649.aspx
It will give you the ability to connect to the server's cmd and run commends on it local cmd from yours pc
TarunJain
Respected Contributor

Re: ML150 serial number

Thanks Guys for sharing your knowledge
TarunJain
Respected Contributor

Re: ML150 serial number

Hi Edgar,
Do you have HP SIM installed in your network?
Edgar Delgado
Occasional Contributor

Re: ML150 serial number

Thanks, 1 month ago I must go to each fial and take note the serial number. :(

Thanks again everybody.
Edgar Delgado
Occasional Contributor

Re: ML150 serial number

.
JasonS_1
Occasional Visitor

Re: ML150 serial number

My organization does not let me use all those whizbang tools that HP supplies and most of my servers are off-site. I am stuck finding it in the command prompt of Server 2003.

Remotely in Server 2003 I use the command prompt with the command: wmic ComputerSystem

You get a lot of nonsense but 3/4 of the way down you will see "Product ID: xxxxxx-xxx".

To get the serial number and HP Model in command prompt, use the command: wmic csproduct
the serial number will appear before the model.