ML150G2 4port sata controller in TC2120

[Gordon Ryan]

I've been unsuccessfully trying to get the 4port SATA controller from a ML150 G2 to work in a older TC2120.

The driver fails to initialise in SBS 2003 citing an internal data error in the driver.

Is there something obvious/simple i have missed, or is this just a scenario that is never going to work?

Thanks

Gordon

[Jaragon]

UNFORTUNATLY YOU'LL PROBABLY NEVER GET IT TO WORK IT'S DESIGNED TO WORK ONLY IN CERTAIN SPECIFIC BOXES I THINK IT INTREACTS WITH SOME COMPONENETS ON THE SYSTEM BOARD.

[Gordon Ryan]

Thanks.

That was the conclusion that i had come to after reinstalling it in the ML150 to confirm that it was working properly.

So now i need to find a solution for the TC2120.

Any recomendations on a low cost sata raid controller?

Thanks

[Jaragon]

unfortunatly no sata maybe scsi check the quick specs for this box

http://h18000.www1.hp.com/products/quickspecs/11554_na/11554_na.HTML

maybe the hp 6 port sata controller would work but it's a long shot