ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML150G3 Raid Software

SOLVED
Go to solution
rogerpatel
Advisor

ML150G3 Raid Software

Hello,

hopefully a quick one, i have just bought two of these budget server for testing, i'm using the on-board LSI Logic Raid.

I have setup a simple mirror and installed windows.

Where is the Windows Raid Software so i can manage / view status of drives in Windows ?

Thanks
10 REPLIES
Brian_Murdoch
Honored Contributor
sanesh vig
Valued Contributor
rogerpatel
Advisor

Re: ML150G3 Raid Software

Thanks guys.

I have tried the HP Storage Manger and this does not work.

Yes i am using the LSI on board and as this manual says i need the LSI software, can anyone give me a download link please?
rogerpatel
Advisor

Re: ML150G3 Raid Software

Thanks Sanesh,

But i cant see any download link on your link.

sanesh vig
Valued Contributor

Re: ML150G3 Raid Software

I am not able to get the exact download link.

However you could choose the specific LSI logic card from the list.

http://www.lsi.com/cm/DownloadSearch.do?locale=EN

Also you could call +44 1344 413 441(LSI Technical Support) if you need further assistance.
rogerpatel
Advisor

Re: ML150G3 Raid Software

fantastic, thanks very much.

I have two last questions whick i need clearing up prior to installing it.

1, As this software is not on the HP web site is it a good practice to install it, Surely HP should have had it up there somewhere?

2, what are the chances of installing it and blowing the array to bits, i only ask this as its a live server and i cant be asked rebuilding it during my Xmas Holidays?

Thanks

Re: ML150G3 Raid Software

Hi

Yes you can go ahead and install the utility.
It is safe.

Download MegaRC windows from the link http://www.lsi.com/storage_home/products_home/internal_raid/megaraid_sata/megaraid_sata_1506/index.html

Same link sent before.

Cheers
sanesh vig
Valued Contributor
Solution

Re: ML150G3 Raid Software

It is all fine.

However i would advise you to take a valid data back up before you perfrom any steps.