ProLiant Servers (ML,DL,SL)
1748265 Members
3967 Online
108760 Solutions
New Discussion юеВ

Re: ML150G3 and USB BOOT

 
Henri CLEMENT
Advisor

ML150G3 and USB BOOT

Hi, first please excuse my poor english..;-)

We have a ML150G3 with an external disk drive on USB.
We have desable the usb from the list of boot device.
But after evry cold boot the ML150G3 stil try to boot from USB Disk.
Have you some help ?

Thanks for your replies,
Best regards from south of France
Henri.

6 REPLIES 6
V├нctor Cesp├│n
Honored Contributor

Re: ML150G3 and USB BOOT

Connecting non-HP USB disks to a Proliant server is not supported. The USB is intended to connect keyboard/mouse or a pen-drive to update firmware. These servers are not designed to have a storage device connected to the USB port all the time.
dms_1
Trusted Contributor

Re: ML150G3 and USB BOOT

Hi,

in Server BIOS select:

Under "SystemOptions" --> USB control --> Legacy USB

this means that the USB ports will be active in the OS only and not during POST and BIOS

Regards
SPa
Trusted Contributor

Re: ML150G3 and USB BOOT

Hi,

This is known.Please update Bios and follow steps mentioned on the below link:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01135177&jumpid=reg_R1002_USEN
Henri CLEMENT
Advisor

Re: ML150G3 and USB BOOT

hi,
thanks dms & SPa for your replies

these 2 solutions dont work.
The DL140 stil want to boot on USB.
:-((

regards, Henri.
Blazhev_1
Honored Contributor

Re: ML150G3 and USB BOOT

Blazhev_1
Honored Contributor

Re: ML150G3 and USB BOOT

Hi again,

sorry, I now saw SPa's reply, ignore the previous POST...

Pac