ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

ML150G3 beep codes

Andras Ordogh
Valued Contributor

ML150G3 beep codes


i have an ml150g3. hanging, no post message, no display, just error beeps. every beeps ara same: ~1 sec, and the error beeps: 1-3-3-1.
(so 1 beep, 1-2 sec pause, 3 beeps etc.).
i downloaded the "ProLiant ML150 Generation 3 Server Maintenance and Service Guide" but i didn't find any beep error code in the pdf.

i reseted the cmos, i unpluged all devices (hdds, cd, the whole drive cage, pci card), i changed memory modules: i got the same error beeps. when no memory modul in MB the beep message the same.

so i will be MB, powersupply, or cpu.
i think it's MB error.

if anybody knows what is 1-3-3-1 beep code, please tell me!

thank you!
Occasional Advisor

Re: ML150G3 beep codes

no error 1-3-3-1
you must try min config,i dont think the power supply and no the cpu
try to change the mother bord

Andras Ordogh
Valued Contributor

Re: ML150G3 beep codes

yes, it was the MB, i changed it yesterday, and everythings fine now.

(but the beep code is strange)