ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML310 G03 embedded 4-Port SATA Raid Controller

 
Michael Richter
Trusted Contributor

ML310 G03 embedded 4-Port SATA Raid Controller

Hi guys,

just want to know if the embedded one is a adptec 2410SA ?

In the Bios it shows up as Intel Chip

cheers
mike
2 REPLIES
Michael Richter
Trusted Contributor

Re: ML310 G03 embedded 4-Port SATA Raid Controller

i found out that the controller is part of the Intel E7230 system chipset .. but at least it should be a 2410SA? right?

i want to flash this controller with teh originall Firmware from Adaptec
http://www.adaptec.com/de-DE/downloads/bios_fw/bios_fw_ver?productId=AAR-2410SA&dn=Adaptec+Serial+ATA+RAID+2410SA

But when i try to install via the AFU.exe i run into the issue, that no supported Controller was found ... ?


Any ideas!? I need to flash this Controller with the orginal Firwmare from Adaptec cause i want to install ESX on it and it seem to be working with Adaptect Firmware b8209


Hope anybody can help me

rg, Mike
Brian_Murdoch
Honored Contributor

Re: ML310 G03 embedded 4-Port SATA Raid Controller

Mike,

If you download the ML310 G3 embedded SATA driver kit from HP...

http://h18023.www1.hp.com/support/files/server/us/download/26742.html

...and extract it, rather than install it, you can have a look at the adpahci.inf file which has the PCI vendor codes for the supported products. Under the [ADAPTEC] section it mentions HOSTRAID but I don't know if you can use the PCI vendor codes in this section to try and find out exactly what you have compared to a true Adaptec chipset/controller.

It's possibly this vendor code which is preventing the firmware from loading.

I hope this helps.

Brian