HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML310 G2 Storage Driver

 
Paul D. Niewierowski
Occasional Visitor

ML310 G2 Storage Driver

Heya,

I have the server mentioned above with the basic onboard sata controller that came as part of the original configuration. I am trying to load server 2008 but the driver on the HP website will not work. Server 2008 can't see the drives to continue with the installation. I called tech support and they couldn't seem to help either.

Any suggestions would be great!
1 REPLY
Kotate
Advisor

Re: ML310 G2 Storage Driver

Hello Paul.

make sure that you downloaded the correct driver (for 64 or 32 bit).

Also, I assume you are using a USB floppy drive. I've noticed that dome brands are not working properly, some load the driver but then during installation, it just doesnt find it.

Make sure you extracted the file that you downloaded and saved on the floppy and not that you are saving the .exe file on the floppy.

Finally, if possible, try with a different USB floppy drive, maybe an HP or a dell should work fine.

Hope it helps!