ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML310 G3-Integrated SATA RAID

=JT=
Frequent Advisor

ML310 G3-Integrated SATA RAID

Hi all,
This is the first time i've used the integrated RAID. Through the BIOS, i've enable the integrated RAID, as there is no SmartArray installed. I'm creating a RAID 1 array with 2 new, blank, hard drives and it's in the process of building the array. My question is, how long does this normally take? Its been at it for about 45 mins and is at about %15. In the past when using the SmartArray it goes very quickly. Is this normal behavior for the Integrated RAID, or perhaps there is another way I should be doing this?

Any insight would be helpful. Thanks in advance!

Justin
2 REPLIES
Gus Kwong
Respected Contributor

Re: ML310 G3-Integrated SATA RAID

I assume you did not hit the pause-screen button :)
Learning never ends
=JT=
Frequent Advisor

Re: ML310 G3-Integrated SATA RAID

Nope, it just takes forever!