ProLiant Servers (ML,DL,SL)
1748149 Members
3428 Online
108758 Solutions
New Discussion юеВ

ML310 G5 RAID management under Windows SBS 2003

 
SOLVED
Go to solution
quaquaraqua
New Member

ML310 G5 RAID management under Windows SBS 2003

Hi i am new to the forum.
I correctly installed a new ML310 G5 server with 2 SAS 250gb disks and Windows SBS 2003, following the whole RAID procedure (enabled RAID on the PC BIOS; entered the RAID BIOS - pressing F8, ctrl+A doesn't work - and correctly configured ad built a RAID1 array; loaded the embedded RAID driver disk pressing F6 during windows setup, etc.). Everything worked out fine and the OS boots up and it's correctly installed on the RAID1 array. I correctly installed all the drivers and HP software using the Smartstart CD, and everything worked out fine. I would like to have a tool for monitoring and check out the array status (like I have on an Acer server), but HP Array configuration Utility (ACU 8.0.14.0) doesn't recognize any controller (see the attachment). Can you help me?

thanks a lot.
2 REPLIES 2
Mark Matthews
Respected Contributor
Solution

Re: ML310 G5 RAID management under Windows SBS 2003

Hi There,

Try this...

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3580655&prodNameId=3580656&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-64b379e59a804fe2a97da98a1c

---------------------------------------------------------------------------------
Please click the white Kudos star to the left if this post is helpful :)
quaquaraqua
New Member

Re: ML310 G5 RAID management under Windows SBS 2003

That's exactly it, installed and working ;) thank you very much, hope that IT problems will always be so simple... :\