ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML310 G5 RAID management under Windows SBS 2003

SOLVED
Go to solution
quaquaraqua
Occasional Visitor

ML310 G5 RAID management under Windows SBS 2003

Hi i am new to the forum.
I correctly installed a new ML310 G5 server with 2 SAS 250gb disks and Windows SBS 2003, following the whole RAID procedure (enabled RAID on the PC BIOS; entered the RAID BIOS - pressing F8, ctrl+A doesn't work - and correctly configured ad built a RAID1 array; loaded the embedded RAID driver disk pressing F6 during windows setup, etc.). Everything worked out fine and the OS boots up and it's correctly installed on the RAID1 array. I correctly installed all the drivers and HP software using the Smartstart CD, and everything worked out fine. I would like to have a tool for monitoring and check out the array status (like I have on an Acer server), but HP Array configuration Utility (ACU 8.0.14.0) doesn't recognize any controller (see the attachment). Can you help me?

thanks a lot.
2 REPLIES
Mark Matthews
Respected Contributor
Solution

Re: ML310 G5 RAID management under Windows SBS 2003

Hi There,

Try this...

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3580655&prodNameId=3580656&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-64b379e59a804fe2a97da98a1c

---------------------------------------------------------------------------------
Please click the white Kudos star to the left if this post is helpful :)
quaquaraqua
Occasional Visitor

Re: ML310 G5 RAID management under Windows SBS 2003

That's exactly it, installed and working ;) thank you very much, hope that IT problems will always be so simple... :\