ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML310 G5 Reboots Continously With No Post

Kumdist
Valued Contributor

ML310 G5 Reboots Continously With No Post

I have a ML350G5 server which reboots continously with no post.
All was working ok after a few weeks ago when the UPS went off. Upon Booting up, it couldnt even go past post, or display..
HP Supplied a new mainboard. Upon replacement, it gave "Fan Solution Insufficient Errors" which I was advised to solve by removing the Jumper7 from the system board. That did fix the fan issue but the rebooting issue still remians. Any help now will be much appreciated.
2 REPLIES
Suman_1978
HPE Pro

Re: ML310 G5 Reboots Continously With No Post

Hi,

What about the Power supply units, have those been replaced?

Thanks
Kumdist
Valued Contributor

Re: ML310 G5 Reboots Continously With No Post

I've replaced Power Supplies with new ones but issue remains. I changed the mainboard,memory,processor.. everything and the issue still remains. Then im thinking its the chassis. I finally found that it was the sensor cable that was causing it. After replacing the sensor cable, server boots perfectly. The sensor cable is located in the front of the ML310 along side the Led Indicators. I am now closing this thread.