ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML310 G5 SC40GE controller

burn_up
Advisor

ML310 G5 SC40GE controller

Hi,

I have a ML310 G5 server with a SC40GE controller, I created the RAID using the LSI utility (pressing F8 on the POST). Everytime I reboot the server a message appears saying "Adapter Configuration may have change adapter configuration is suggested", I already try clearing the NVRAM and updating the firmware, but I'm out of ideas

Thanks
10 REPLIES
KarloChacon
Honored Contributor

Re: ML310 G5 SC40GE controller

hi

but what's happening only the message or you losing the RAID level?

did you update firmware for BIOS or for SC40GE?


regards
Didn't your momma teach you to say thanks!
burn_up
Advisor

Re: ML310 G5 SC40GE controller

No the RAID level is still there, and the firmware of the controller is up to date
KarloChacon
Honored Contributor

Re: ML310 G5 SC40GE controller

well you can try updating System ROM but I am think this is an simple message and does not affect server at all


nothing to worry about

regards
Didn't your momma teach you to say thanks!
burn_up
Advisor

Re: ML310 G5 SC40GE controller

The BIOS is also up to date W05 (2008.04.03) but I have others servers like this one and that one doesn't have the message, and also the performance of this server is slower than the others servers
KarloChacon
Honored Contributor

Re: ML310 G5 SC40GE controller

ok so you did not mention you had a problem...

Didn't your momma teach you to say thanks!
KarloChacon
Honored Contributor

Re: ML310 G5 SC40GE controller

driver up to date to?

which OS?

do you have the change to swap controllers between severs? to test

regard
Didn't your momma teach you to say thanks!
burn_up
Advisor

Re: ML310 G5 SC40GE controller

Drivers are at 7.91, but I don't think drivers can be a problem during the POST process, right? and the OS is Windows server 2k3 SBS
KarloChacon
Honored Contributor

Re: ML310 G5 SC40GE controller

just wanted to know since you say performance is being affected

so the only option swap controllers


cool from Costa Rica

Didn't your momma teach you to say thanks!
KarloChacon
Honored Contributor

Re: ML310 G5 SC40GE controller

or you can try first another slot in the same server for the controller

regards
Didn't your momma teach you to say thanks!
burn_up
Advisor

Re: ML310 G5 SC40GE controller

Before doing that I will try first the erase utility without HDD's

I will let you know the results