ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML310 G5 Stuck in Diagnostic Utility

 
my3taylors
Occasional Visitor

ML310 G5 Stuck in Diagnostic Utility

I was installing a new P800 controller and I modified the Boot order and moved the PCI P800 to number one poisition and now I'm stuck when it boots in this Diagnostic Utility window and locked up unable to move or ESC. any ideas on how to get around this bug. Thanks, Robert
1 REPLY
my3taylors
Occasional Visitor

Re: ML310 G5 Stuck in Diagnostic Utility

I learned from the warranty guy that if your system ever gets stuck in the boot cycle and wont move forward move the dip switch at the bottom right #19 on the inside panel to #6 up in the on position and reboot to modify the bios then shut down and turn it off. Your on your way after that.