ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML310 SCSI and IDE card

 
Andrea favero
Occasional Visitor

ML310 SCSI and IDE card

I have installed Win2000 server on SCSI drive.
The system work correctly. After i have installed a PCI IDE RAID card. When i try to start the system, the server don't start. The SCSI bios write:" BIOS installed". In BIOS the first startup controller is SCSI controller on board.
If i uninstall the PCI IDE RAID controller the system start.
1 REPLY
Sunil Jerath
Honored Contributor

Re: ML310 SCSI and IDE card

Hello Andrea,
Please disable the BIOS of the IDE Raid controller you have by going into the advanced configuration of the IDE controller you have. I have seen this with some controllers because they take over the Boot controller order.

Regards,