HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML310 integrated NIC Problem

 
Michael Bitsch
Occasional Visitor

ML310 integrated NIC Problem

Hi there, I have this ML310 wit a integrated GB-NIC onboard. I had Problems with it for weeks, till I used the Tool iperf for measuring Bandwith. If i used the ML as an iperf client everything was OK ( >90 MB per minute). But if a clientcomputer was the client and the ML uses iperf in Servermode, the bandwith was less then 1MB per minute. I have called HP for support and they changed the Systembord but nothing happens. Everything is the same. I have changed drivers, Firmware, Registrysettngs,... Nothing helps. Then I installed a extra GB-NIC. And now everything works great.
Does anybody know something about this "curiosity".
Thanks very much
Cheers
Mike