ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML330 G2 MEGARAID Failure

CA1333488
Occasional Visitor

ML330 G2 MEGARAID Failure

Hello

This is what I got:

Compaq ProLiant ML330 G2
2x 80 GB IDE-HDDs as RAID-1 on a LSI MegaRAID Controller (OEM from HP?)
Novell Netware 6.0 SP4
2 Volumes: SYS (2 GB) and MAIL (53 GB)


Before I started, I did an extra Backup from the SYS-Volume. Then I started the SP5 Installation. The installation where no problem. At the end, the server restarted, then the problem began.

One the first restart, the server gave me the error "Unable to EXEC server. Cannot load the file c:\command.com". After this message I made a restart and since then I do not come back to this error-message. The server does not boot! I see on the start of the server the list of the Array and the Array is OFFline!!! But I have got no possibility to go online! AND BOTH(!) harddisks have the Status "REBUILDING".


Thanks

Bernd


3 REPLIES
CA1338157
Occasional Visitor

Re: ML330 G2 MEGARAID Failure

Hi Bernd,

I have the very same issue occuring at my customer and was wondering if you found out something about this issue.

Gruss
Pieter
Bernd Wrana
Occasional Contributor

Re: ML330 G2 MEGARAID Failure

Please, look at my answer on thread "ML330 Megaraid controller".

Bernd
Megha
Valued Contributor

Re: ML330 G2 MEGARAID Failure

Members, Bernd was referring to the below thread:

http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=1006878

Good Luck,
Megha.