HPE Community
ProLiant Servers (ML,DL,SL)
1753518 Members
5137 Online
108795 Solutions
New Discussion

ML330 G2 wont boot from IDE drive, any help would be appreciated!?

 
aRCX
New Member

‎12-06-2006 10:49 AM

‎12-06-2006 10:49 AM

ML330 G2 wont boot from IDE drive, any help would be appreciated!?

My ProLiant ML330 G2 wont boot from IDE drive, it has an SCSI-3 feature board and embedded IDE controller but booting from CD-ROM works perfect over IDE, even installation of Linux/Windows works and drive is found but as soon as I reboot machine it wont boot from that IDE drive, tried several other HDs but no luck!?

I have no SCSI-3 LVD harddrive to test it to boot from, now has anyone had the same problem or knows anything about it or might it just be that my Proliant is broken!!!

Please any HELP would be greatefully appreciated!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.