ProLiant Servers (ML,DL,SL)
1748014 Members
4413 Online
108757 Solutions
New Discussion юеВ

Re: ML330 G3 - Looking for controller help!!

 
SOLVED
Go to solution
J_G
New Member

ML330 G3 - Looking for controller help!!

I have an ML330 G3 which of course is discontinued. I'm looking for supported array controller that will:

1. Work with the 330 motherboard.
2. Work with WIn2K3

Thanks,
JG
6 REPLIES 6
Steven Clementi
Honored Contributor
Solution

Re: ML330 G3 - Looking for controller help!!

Jason:

Any Smart Array 5x or 6x controller should work with the ML330 G3. Probably the cheaper one available is the 641, depending on what you need to do with the controller. If for OS, then the 641 should work just find.


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
J_G
New Member

Re: ML330 G3 - Looking for controller help!!

That's exactly what I was looking for. Thanks for the quick response!
J_G
New Member

Re: ML330 G3 - Looking for controller help!!

Forgot, one more question. The 641 shows that it's PCI-X. I can't remember for the life of me if the "X" will cause any problems in being in the older 330. I can't even find any tech specs on the 330 to see what kind of PCI slots it supports.
Steven Clementi
Honored Contributor

Re: ML330 G3 - Looking for controller help!!

General Docs...

" http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&taskId=&contentType=SupportManual&prodSeriesId=316573&prodTypeId=15351 "

Quick Specs...

" http://h18000.www1.hp.com/products/quickspecs/11614_div/11614_div.HTML "


I do not think the "X" will give you any grief, but can't say for sure. It's been soo long since I have seen anything older then a DL380 G4.


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
Steven Clementi
Honored Contributor

Re: ML330 G3 - Looking for controller help!!

Looking at the quickspecs... the 641 is listed as an option. A pretty good indication that it will work.


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
J_G
New Member

Re: ML330 G3 - Looking for controller help!!

Just put the purchase throught. Thanks.