HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML330-G3 failed disk on CSB-6 controller

 
Robert Frost_1
Occasional Visitor

ML330-G3 failed disk on CSB-6 controller

We have a failed 80GB IDE non-hot-plug HDD on an ML330-G3. This disk was part of a RAID 0+1 on a CSB-6 controller. Quick question - when we replace the disk will the RAID rebuild itself (I am guessing not)? If not, do we need to force a rebuild via Windows (if so how/where ?), or via the RAID setup during POST ?

Just trying to be forewarned before we go ahead with this. Thanks in advance.
1 REPLY
Oleg Koroz
Honored Contributor

Re: ML330-G3 failed disk on CSB-6 controller

if all up to date and spy utility running, add Drive from F8 to spare pool, save and restart server it will do, otherwise you need to do manually and rebuild it from spare pool and wait from F8 till it done.

http://h18023.www1.hp.com/support/files/server/us/index.html