ML330 G3

[Kenneth Benson]

Originally setup with adaptec 29160i pci scsi card. However card and drives are starting to go bad. Server is loaded with NT4 sp6a+updates.
I would like to use the integrated ide raid (I turned it on in the bios) however NT4 doesn't see it and I can't seem to find the drivers for it. Can anyone point me in the right direction?

[Mauro Rusignuolo]

do you have downloaded he latest version of the ProLiant Support Pack for windows NT4 ?

take a look at this link:

http://h18023.www1.hp.com/support/files/server/us/download/20102.html

Bye.

TJK

[Kenneth Benson]

Downloaded and installed. However it still doesn't see the controller. Can you tell me which device should be started to let it see?
I tried installing cp002893 by hand and it said it doesn't need to be installed. Is that the correct one?

[Mauro Rusignuolo]

do you have enabled the embedded ata raid in the bios setting?

also upgrade the firmware:
http://h18023.www1.hp.com/support/files/server/us/download/21992.html

read what fixes here:
http://h18023.www1.hp.com/support/files/server/us/revision/7462.html

may be the problem will be solved.

let me know.

Bye

TJK