cancel
Showing results for 
Search instead for 
Did you mean: 

ML330 G3

Kenneth Benson
Occasional Visitor

ML330 G3

Originally setup with adaptec 29160i pci scsi card. However card and drives are starting to go bad. Server is loaded with NT4 sp6a+updates.
I would like to use the integrated ide raid (I turned it on in the bios) however NT4 doesn't see it and I can't seem to find the drivers for it. Can anyone point me in the right direction?
3 REPLIES
Mauro Rusignuolo
Trusted Contributor

Re: ML330 G3

do you have downloaded he latest version of the ProLiant Support Pack for windows NT4 ?

take a look at this link:

http://h18023.www1.hp.com/support/files/server/us/download/20102.html

Bye.

TJK
<> Leonardo da Vinci
Kenneth Benson
Occasional Visitor

Re: ML330 G3

Downloaded and installed. However it still doesn't see the controller. Can you tell me which device should be started to let it see?
I tried installing cp002893 by hand and it said it doesn't need to be installed. Is that the correct one?
Mauro Rusignuolo
Trusted Contributor

Re: ML330 G3

do you have enabled the embedded ata raid in the bios setting?

also upgrade the firmware:
http://h18023.www1.hp.com/support/files/server/us/download/21992.html

read what fixes here:
http://h18023.www1.hp.com/support/files/server/us/revision/7462.html

may be the problem will be solved.

let me know.

Bye

TJK
<> Leonardo da Vinci