ML330 G6 Raid Controller Battery Location

[krod]

I have a ML330 G6 and the guy before me installed the Raid Controller Battery on the outside of the PSU casing so now when I try to install the second redundant PSU (lower slot) the clips for the Raid Controller Battery are stopping the PSU going in. Obviously the Raid Controller Battery is in the wrong location but I can't see where it is supposed to go.

Any ideas?

Cheers.

[Renjiv]

Hi,

You may check the video in below link for installing array battery and power supply.

http://h20464.www2.hp.com/index.html

Open the above link. Select Servers> HP ProLiant ML Servers> HP ProLiant Ml 330 G6 Server Series

Click on “Remove/Replace Videos”

You may also check below document:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=125&prodSeriesId=3948598&prodTypeId=15351&objectID=c02204576

I hope the info will help you.

Regards,

Renji V

[PGTRI]

hi,

The BBWC should be installed above the fan module. Just check the attached pic.

And do not forget the kudos star please! :)

regards,