ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML330 G6 Raid Controller Battery Location

krod
Occasional Visitor

ML330 G6 Raid Controller Battery Location

I have a ML330 G6 and the guy before me installed the Raid Controller Battery on the outside of the PSU casing so now when I try to install the second redundant PSU (lower slot) the clips for the Raid Controller Battery are stopping the PSU going in. Obviously the Raid Controller Battery is in the wrong location but I can't see where it is supposed to go.

Any ideas?

Cheers.

2 REPLIES
Renjiv
Respected Contributor

Re: ML330 G6 Raid Controller Battery Location

Hi,

 

You may check the video in below link for installing array battery and power supply.

 

 

http://h20464.www2.hp.com/index.html

 

Open the above link. Select Servers> HP ProLiant ML Servers> HP ProLiant Ml 330 G6 Server Series

 

Click on “Remove/Replace Videos”

 

 

You may also check below document:

 

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=125&prodSeriesId=3948598&prodTypeId=15351&objectID=c02204576

 

I hope the info will help you.

 

Regards,

Renji V

I am an HP employee.

Was this post useful? -
To say thanks click the "thumbs up" icon below!!! .....
PGTRI
Honored Contributor

Re: ML330 G6 Raid Controller Battery Location

hi,

 

The BBWC should be installed above the fan module. Just check the attached pic.

 

And do not forget the kudos star please! :)

 

regards,

How to Say Thank You? Just click the KUDOS!