ML350-65 PCI bus problem

[nando007]

Hi, we just purchased 2 brand new HP ML350-G5, one of them running SBS 2003 and when we've got it from the supplier, it's all ok. It has 2 Xeon CPUs, RAID5 array and 4 GB RAM.
The only additional hardware was PCI fax/modem card installed properly.
However, I need to change the domain name and therefore I reinstall SBS2003 and the problem starts. After finished with installation, in device manager, there are always 3 devices with yellow exclamation mark: base system device, unknown device and PCI device, but I installed the driver for the modem and these 3 always stay. I have updated ROM but still the same, I also tried to take the PCI fax/modem card out and did a complete reinstall, but still these 3 devices always show in device manager... pls help!

[KarloChacon]

you need to install Proliant support Pack to get all drivers installed

W2003X32 bits
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121586&prodNameId=3279711&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-9ec92499b7804ff09773e4ebbb

W2003x64 bits
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121586&prodNameId=3279711&swEnvOID=1113&swLang=8&mode=2&taskId=135&swItem=MTX-d292a703944445a980f74e4dee

bye

[nando007]

Hi Karlo, that's great! it fixed my problems, I do appreciate your help and promptness!! how can I give points to you?

thnks again

[KarloChacon · Accepted solution]

glad to hear

there are like drop-menus next to my name "karlo" where I answered to you where 10 means the best answer