ML350 E200 raid config.

[Jeff.Daniels_1]

We currently have a ML350 (Model 458246-011) that has two SAS 146GB drives configured in a RAID 1 configuration. We are looking at the possibility of increasing the number of drives in the server and adding another 2 RAID sets to the current array. I read the quickspecs guide and I take it that the E200 controller only supports 2 raid where I was after 3?

[Johan Guldmyr]

Hi, what part of the quickspec would say that it only supports two raid sets?

Link to quickspecs:
http://h18004.www1.hp.com/products/quickspecs/12460_div/12460_div.html

As far as I know there is no such limitation. Have created three raid sets several times.

[wobbe]

You should have no problem creating 3 times a raid 1 set. If you want a raid 5 set then you will need the bbwc module.