ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350 Failed Disk Error replacing Disk

vakantieman
Occasional Visitor

ML350 Failed Disk Error replacing Disk

All,

We have a ML350 with a RAID 5 configuration. The disks are placed in Slot 0,1,2. Last week the Disk in Slot 2 failed and we replaced the disk. Normally the array is rebuilding and everybody is happy but not this time.

When I look in the Array Configuration Utility. The server see the replaced disk as a new unassigned disk using Port 1 ID 2. But the problem is that the server also see the failed disk at SCSI Port 1 ID 6. But this disk is not present in the server. We have done the following tasks to resolve the problem but none of them solves the problem:

- Rescan Controller
- Replaced the replaced disk with another new Disk
- Installed the latest firmware on the controller and disks

We tried to remove or add the disk using the Array configuration console client. But we receive a error that the command is not supported.

Do anyone have a suggestion what to do?
3 REPLIES
djjoost
Occasional Visitor

Re: ML350 Failed Disk Error replacing Disk

Zelfde probleem hier (almost the same problem here).

http://forums12.itrc.hp.com/service/forums/questionanswer.do?threadId=1232780

Who can help us?
Evert Goor
Trusted Contributor

Re: ML350 Failed Disk Error replacing Disk

Same error here. Anyone has an idea ?
vakantieman
Occasional Visitor

Re: ML350 Failed Disk Error replacing Disk

I tried every single slot on my server and all give the same problem. Is there anyone which give us a solution?