ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350 G 10 not showing total memory.

SOLVED
Go to solution
Sirius
Occasional Contributor

ML350 G 10 not showing total memory.

I've put four 16GB Dimms into an ML350 G10 with two processors.
the Dimms are in slots 8,10 for each cpu.

When the server is booting, it says 64GB total memory, 32GB available.

I've installed ESXI which also only sees 32GB.

does anyone know why I'm only seeing half the ram?
3 REPLIES
Jimmy Vance
HPE Pro

Re: ML350 G 10 not showing total memory.

Sounds like memeory mirroing is enabled




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Sirius
Occasional Contributor

Re: ML350 G 10 not showing total memory.

Nice idea, but I just checked and as far as I can see there is no memory mirroring enabled.

Under memory options it is simply set to 'Advanced ECC support'.

 

Sirius
Occasional Contributor
Solution

Re: ML350 G 10 not showing total memory.

This has been solved now, HP got back to me and went through some troubleshooting steps.

Swapping the Processors with each other did the trick, I dont know why, unless possibly one wasnt seated correctly.

The fact that the server saw 64GB on bootup threw me a little.