HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350 G1 Startup Issue

 
CliffH
Occasional Contributor

ML350 G1 Startup Issue

I have a ML350 G1 that does not boot normally if it is turned off for an extended period of time. In those instances, the power supply will come on for approximately 2 seconds then go off and back on again repeatedly.

I first thought the power supply was bad but later discovered that if I just leave it alone , cycling on and off, it will eventually boot and operate normally.

any ideas on what might be causing this behavior?

Thx.

Cliff
1 REPLY
Brian_Murdoch
Honored Contributor

Re: ML350 G1 Startup Issue

Hi Cliff,

Both of the power supply models for the ML350 G1 had issues. The earlier 600-900Mhz systems used PSU part number 163346-001 and the later 1Ghz models used PSU part number 216108-001. They both have problem histories so I think this behaviour will probably be caused by the power supply.

Regards,

Brian