ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350 G2 Second LED turned red

SOLVED
Go to solution
Hans Vochten
Occasional Visitor

ML350 G2 Second LED turned red

Since a few days, a red light appeared on the front of our ML350 G2 server (desktop version).
I can't seem to find any documentation on what it means, except on this URL: http://h18004.www1.hp.com/products/quickspecs/10960_div/10960_div.html
saying it's related to 'Internal System Health'.
Anyone ideas on what this exactly means, or where I have to look for more info?
Regards,

hans
4 REPLIES
Albert Austin
Esteemed Contributor
Solution

Re: ML350 G2 Second LED turned red

Hi,

Yes, it does mean that you have a fault with the 'Internal System Health'. Could be memory,CPU... A good way to collect more information would be thorugh System Management Homepage. If you have not installed this then you could find it here depending on what OS you have running on your sevrer.

http://h18023.www1.hp.com/support/files/server/us/family/model/2588.html?submit.y=4&submit.x=5〈=en&cc=us

Look under sub-heading "Software - System Management"

Albert


sandeep_raman
Honored Contributor

Re: ML350 G2 Second LED turned red

Hello Hans,

Is this what you are looking for?
http://h20000.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_236634-002_rev3_us/TPM_236634-002_rev3_us.pdf
Pg 4-10 (67 of 85)

Check for System board led's and compare with the Table 4-6: System Board LEDs

Btw,is the server rebooting or performance issue?

SRH
Hans Vochten
Occasional Visitor

Re: ML350 G2 Second LED turned red

Tanx guys for the quick response!
The document is what I looking for.
I have checked with the System Management Homepage (had it installed allready). It showed a few problems in the Integrated Management Log, resulting in some warnings in the Overall System Status. After I cleared the log (the warning were related to old issues), the Overall System Status changed to "No failed/degraded items". The LED is still red though. What do you think, should I trust the System Management tools (indicating no problems), or the LED?
sandeep_raman
Honored Contributor

Re: ML350 G2 Second LED turned red

If everything is fine with the server,the led should'nt be red.
Did you check the system board leds?
Have you rebooted the server?

SRH