ML350 G3 reinstall NT 4.0

[Alout]

I can't reinstall NT 4.0 Server on my ML 350 G3

I have 4 disk configured in RAID 5

I try with old and recent Smart Start

The controler Compaq LC2 Array is not detected by ACU in Smart Start

When I install only 2 disks, in RAID 0+1 it work but I prefer RAID 5

How can I do that ???

[Girma Kassa_2]

Hi Olivier,

Have you tried to set up the Raid 5 using the ORCA by pressing F8 on boot. If not try to set the Raid in ORCA for sure this controller does support the Raid 5.

Good luck

Cheers,

Girma

[Prashant (I am Back)]

Go for a manual installation if RAID is configured, by providing the controller driver form site.
Then configure the HP utility on the same.
That will do

Prashant S.

[Alout]

I have configured my disks with ORCA

All is right, but NT install crash when I work in RAID 5, not in RAID 0+1

In documentation, i haven't found anything about this pb