ML350 G3

[Gabriel T]

My server jams and bug has the next message:
"Logical drive 1 configured on Array Controller in slot 2, has returned a fatal error on a read/write request on the volume. Logical block address 48ae10, block count 24, command 30, drive bus 1 and Drive Id 1."
or,
"The device, \Device\Harddisk0, has a bad block."
or,
"The device, \Device\Scsi\cpqcissm1, did not respond within the timeout period."
How can i repair this?

[e4services]

Sounds like a bad drive or missing drive or miss configuration. Drive Id 1. Harddisk0 is the logical drive formed from the drives with ID

[HGN]

Hi

Looks like the harddrive is having some issues and may have to be replaced, drive id1 means it should be the second disk

Rgds

HGN

[Jerry Leinsing]

You did not mention if you ran the HP Diagnostics and the result.
Being an array, you should also have separate array diagnostics on SmartStart.

Be aware that if you can't find diags on the HP web site/server/downloads/diags area that it is most likely on the Smart Start disk itself.

[Gabriel T]

What tool can I use for diagnostic