ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350 G4 server wont boot

Elcon Asumen
Occasional Visitor

ML350 G4 server wont boot

Hi our one ml350 g4 server wont boot/power on. The amber power LED is blinking/flashing. Try to go the power on troubleshooting. But there is no error related to power led flashing. Any information will be helpful.
3 REPLIES
Mahesh Kumar Malik
Honored Contributor

Re: ML350 G4 server wont boot

Hi Elcon

Bring the server to minimum Hardware configuration i.e. remove all PCI cards, HDDs etc and see if powers ON. If yes, insert the accessories one by one to locate the problem

Regards
Mahesh
Terry Hutchings
Honored Contributor

Re: ML350 G4 server wont boot

This is a symptom of a server powered off. If the server doesn't do anything when you press the power button and there is no internal health led lit, then this may be an actual power button problem.
The truth is out there, but I forgot the URL..
HGN
Honored Contributor

Re: ML350 G4 server wont boot

Hi

This looks like a power supply issue,maybe the pwer supply is down if that is ok then it would be the main board,you can also try to reseat all the cards,connectors.

Rgds

HGN