ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350 G4p Memory Issue

SOLVED
Go to solution
abuitrago
Advisor

ML350 G4p Memory Issue

Hi everyone,

I have a ML350 G4p that actually its working with 2GB of RAM (4 Modules of 512MB in A and B banks)

Now i buy 2 modules of 512MB and i want to install it in the banks C. When i do that he server send me an error of "Mistmatch configuration" and only see 2GB not 3GB.

I saw in the quickspecs page of the server that the server only supports 512MB, 1GB, 2GB and 4GB..not 3GB(6 x 512MB)

Can any one tell me if its true.. or the server has a board problem..

Best Regards,

Bye
2 REPLIES
sahnia
Advisor
Solution

Re: ML350 G4p Memory Issue

Hi,

Even though the memory configuration never shows that 3 GB is supported on the server, yet I believe that the issue is related to Dual Rank Dimms.
When the server is booted with bank A and B Dual Rank Dimms the server works fine. But it does not work the same way with the Bank C. Please check the section "Installing maximum memory" in the following link:

http://h18000.www1.hp.com/products/quickspecs/12199_div/12199_div.HTML#Memory

Thus it seems that if all DIMM slots are being populated then the DIMM's should be single rank.
Please try single rank DIMM's from any other server to this server and check.

Take care

Aman
abuitrago
Advisor

Re: ML350 G4p Memory Issue

hi Adam,

by the moment i dont have single rank memory modules.

I only have this one..
1 GB of Advanced ECC PC2-3200 DDR2 SDRAM DIMM Memory Kit (2 x 512 MB)
343055-B21