ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350 G4p smart array 641 (ready for rebuild)

Andrew Sell
Occasional Visitor

ML350 G4p smart array 641 (ready for rebuild)

I have a failed drive that was replaced over 2 weeks ago and the new drive shows 0% complete. The server has been rebooted but shows the same result.

I have updated just about everything on this controller.
1 REPLY
Graeme Bray
Regular Advisor

Re: ML350 G4p smart array 641 (ready for rebuild)

Bad news. Look through the other drives and see if any have Hard Read Errors.

If so, then it looks like you have another drive going back. We just recently had this happen. The only way to avoid is to replace the server, or do a rebuild.

That was HP's suggestion to us.