ML350 G5 E200i 128MB BBWC RAID MIGRATION

[Petr Špaček]

Hello,
I want to migrate from RAID1 to RAID 5. There is no this option in ACU. Why? Can I do it? This is my configuration:

=> ctrl all show config detail

Smart Array E200i in Slot 0 (Embedded)
Bus Interface: PCI
Slot: 0
Serial Number: QT8AMP7191
Cache Serial Number: P9A3A0B9SWS40Q
RAID 6 (ADG) Status: Disabled
Controller Status: OK
Chassis Slot:
Hardware Revision: Rev A
Firmware Version: 1.82
Rebuild Priority: Medium
Expand Priority: Medium
Surface Scan Delay: 15 secs
Post Prompt Timeout: 0 secs
Cache Board Present: True
Cache Status: OK
Accelerator Ratio: 50% Read / 50% Write
Drive Write Cache: Disabled
Total Cache Size: 128 MB
No-Battery Write Cache: Disabled
Cache Backup Power Source: Batteries
Battery/Capacitor Count: 1
Battery/Capacitor Status: OK
SATA NCQ Supported: False

Array: A
Interface Type: SAS
Unused Space: 0 MB
Status: OK

Logical Drive: 1
Size: 68.3 GB
Fault Tolerance: RAID 1
Heads: 255
Sectors Per Track: 32
Cylinders: 17562
Stripe Size: 128 KB
Status: OK
Array Accelerator: Enabled
Unique Identifier: 600508B1001032343020202020200007
Disk Name: \\.\PhysicalDrive0
Mount Points: C:\ 68.3 GB
Logical Drive Label: ACDA726EQA69MU5240 1993
Mirror Group 0:
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 72 GB, OK)
Mirror Group 1:
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 72 GB, OK)

physicaldrive 1I:1:1
Port: 1I
Box: 1
Bay: 1
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 72 GB
Rotational Speed: 15000
Firmware Revision: HPD7
Serial Number: 3KP3NB3V000097088W2J
Model: HP DF072A8B56
PHY Count: 1
PHY Transfer Rate: 3.0GBPS
physicaldrive 1I:1:3
Port: 1I
Box: 1
Bay: 3
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 72 GB
Rotational Speed: 15000
Firmware Revision: HPD0
Serial Number: DQA2P65002940618
Model: HP DF072A9844
PHY Count: 1
PHY Transfer Rate: 3.0GBPS

unassigned

physicaldrive 2I:1:5
Port: 2I
Box: 1
Bay: 5
Status: OK
Drive Type: Unassigned Drive
Interface Type: SAS
Size: 72 GB
Rotational Speed: 15000
Firmware Revision: HPD0
Serial Number: BJL4P9100RW80903
Model: HP DF072BAFDT
PHY Count: 2
PHY Transfer Rate: 3.0GBPS, Unknown
physicaldrive 2I:1:6
Port: 2I
Box: 1
Bay: 6
Status: OK
Drive Type: Unassigned Drive
Interface Type: SAS
Size: 72 GB
Rotational Speed: 15000
Firmware Revision: HPD7
Serial Number: JEX02D7C
Model: HP DF072BABUD
PHY Count: 2
PHY Transfer Rate: 3.0GBPS, Unknown

[TTr]

First you have to add the drive to the existing R1 array by using the "expand array" feature. Then you can convert from R1 to R5.