HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350 G5 E200i 128MB BBWC RAID MIGRATION

 
Petr Špaček
Occasional Visitor

ML350 G5 E200i 128MB BBWC RAID MIGRATION

Hello,
I want to migrate from RAID1 to RAID 5. There is no this option in ACU. Why? Can I do it? This is my configuration:

=> ctrl all show config detail

Smart Array E200i in Slot 0 (Embedded)
Bus Interface: PCI
Slot: 0
Serial Number: QT8AMP7191
Cache Serial Number: P9A3A0B9SWS40Q
RAID 6 (ADG) Status: Disabled
Controller Status: OK
Chassis Slot:
Hardware Revision: Rev A
Firmware Version: 1.82
Rebuild Priority: Medium
Expand Priority: Medium
Surface Scan Delay: 15 secs
Post Prompt Timeout: 0 secs
Cache Board Present: True
Cache Status: OK
Accelerator Ratio: 50% Read / 50% Write
Drive Write Cache: Disabled
Total Cache Size: 128 MB
No-Battery Write Cache: Disabled
Cache Backup Power Source: Batteries
Battery/Capacitor Count: 1
Battery/Capacitor Status: OK
SATA NCQ Supported: False

Array: A
Interface Type: SAS
Unused Space: 0 MB
Status: OK

Logical Drive: 1
Size: 68.3 GB
Fault Tolerance: RAID 1
Heads: 255
Sectors Per Track: 32
Cylinders: 17562
Stripe Size: 128 KB
Status: OK
Array Accelerator: Enabled
Unique Identifier: 600508B1001032343020202020200007
Disk Name: \\.\PhysicalDrive0
Mount Points: C:\ 68.3 GB
Logical Drive Label: ACDA726EQA69MU5240 1993
Mirror Group 0:
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 72 GB, OK)
Mirror Group 1:
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 72 GB, OK)

physicaldrive 1I:1:1
Port: 1I
Box: 1
Bay: 1
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 72 GB
Rotational Speed: 15000
Firmware Revision: HPD7
Serial Number: 3KP3NB3V000097088W2J
Model: HP DF072A8B56
PHY Count: 1
PHY Transfer Rate: 3.0GBPS
physicaldrive 1I:1:3
Port: 1I
Box: 1
Bay: 3
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 72 GB
Rotational Speed: 15000
Firmware Revision: HPD0
Serial Number: DQA2P65002940618
Model: HP DF072A9844
PHY Count: 1
PHY Transfer Rate: 3.0GBPS

unassigned

physicaldrive 2I:1:5
Port: 2I
Box: 1
Bay: 5
Status: OK
Drive Type: Unassigned Drive
Interface Type: SAS
Size: 72 GB
Rotational Speed: 15000
Firmware Revision: HPD0
Serial Number: BJL4P9100RW80903
Model: HP DF072BAFDT
PHY Count: 2
PHY Transfer Rate: 3.0GBPS, Unknown
physicaldrive 2I:1:6
Port: 2I
Box: 1
Bay: 6
Status: OK
Drive Type: Unassigned Drive
Interface Type: SAS
Size: 72 GB
Rotational Speed: 15000
Firmware Revision: HPD7
Serial Number: JEX02D7C
Model: HP DF072BABUD
PHY Count: 2
PHY Transfer Rate: 3.0GBPS, Unknown
1 REPLY
TTr
Honored Contributor

Re: ML350 G5 E200i 128MB BBWC RAID MIGRATION

First you have to add the drive to the existing R1 array by using the "expand array" feature. Then you can convert from R1 to R5.