ML350 G5 LFF (458244-421) internal cables part numbers

[Mike Klimkin]

Hi,

We have a ML350 G5 LFF (458244-421) at the remote site. It has only one cable that goes from the drive cage to the internal E200i port on the mother board. We want to extent our storage (plug 4 additional HDDs) so as I understand we need one more cable. Could somebody please advise the correct part number for ordering (not a service number ending with -001)? I gave up finding the correct number - HP told to ask distributors - they have no idea.

Thank you very much in advance.

[.•´¯`•.¸¸. ><((((º>]

will this help:

391330-B21
HP Internal Serial ATA (SATA)/Serial Attached SCSI (SAS) Multi-Lane Cable - 30AWG, 4-lane - 48cm (19in) length

[Mike Klimkin]

Thank you for your answer. The cable you specified looks like 1 connector from motherboard side and 4 connectors from drive cage side (http://www.apitcomp.ru/catalog/server_option_raid/54358.jpg). I found a HP ProLiant ML350 G5 Server series - Part Locator - http://vsslfpro.zcce.compaq.com/plmcontent/NACSC/SML/results.htm?SID=1121586&MEID=3A38B3D3-5968-44FF-9A8D-7247F33651F6. if you click on the SATA/SAS backplane you'll see only two connectors on the backplane :( So, I'm confused what cable do I need.

[.•´¯`•.¸¸. ><((((º>]

Hello again,

These are all cables listed for this server. Unfortunately i dont have one myself so i cannot look it up, but maybe this will help?

382956-001
Serial ATA (SATA) 6-port controller I2C LED power cable - With 3-pin connectors
436071-001
Serial Attached SCSI (SAS) hard drive backplane power and data cable
225881-001
IDE Ultra ATA dual device cable - All three connectors are 40-pin (F) and drive connectors have pull tabs and center polarization - 35cm (13.75in) from system board to first connector - 46cm (18in) total length
371729-B21
USB cable - Includes audio KVM, two-pack, 1.8m(6ft) long
371730-B21
PS2 cable - Includes audio KVM, two-pack, 1.8m(6ft) long
389952-001
Internal 4-lane Serial ATA (SATA)/Serial Attached SCSI (SAS) option cable
391330-B21
HP Internal Serial ATA (SATA)/Serial Attached SCSI (SAS) Multi-Lane Cable - 30AWG, 4-lane - 48cm (19in) length
393275-001
Hot-swap Serial ATA (SATA)/Serial Attached SCSI (SAS) cable assembly - 48.2cm (19in) long (short version), 4-lane
409124-001
Battery cable assembly - 28AWG, 16-pin - 29.2cm (11.5in) long
409125-001
Battery cable assembly - 28AWG, 16-pin - 60.9cm (24in) long
413987-001
CD-ROM drive signal cable
417836-B21
Smart Array P400 battery attach cable kit - 61cm (24in) long
436934-001
Floppy drive cable - 30.4cm (12in)
465660-001
Serial ATA (SATA) DVD drive power converter cable
465661-001
Serial ATA (SATA) cable - 1U, 61.0cm (24.0in) long
Cable (Interface) [Cables]
378966-001
SCSI interface cable - Very high density cable interface (VHDCI) - Includes bracket and screws
418300-001
Secondary parallel and serial port cable assembly
Cable Kit [Cables]
163353-001
Signal cable kit - Includes IDE ribbon (40-position), floppy data ribbon, and signal ribbon cable
306565-001
Signal cable kit - Includes assorted data cables
333370-B21
Internal to external SCSI cable assembly kit (VHDCI) with brackets and screws
409436-001
Cable kit - Includes an 80-pin IDE hard drive/CD-ROM drive cable, a data cable, center fan cage cable, and VGA front video cable

[Mike Klimkin]

Thanks a lot! Looks like I will buy all the cables listed just to be sure it will work for 100% as server is located at the remote site and there are no any stores selling HP parts :)