ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350 G5 SAS LED's cycling through colors

mikegw
Occasional Contributor

ML350 G5 SAS LED's cycling through colors

I have a ML350 G5 running off the internal E200i RAID controller. There are 2 arrays: first array has 4-146G 3.5" SAS drives. The second array has 2-500g SATA drives. The server runs fine in this configuration. The firmware is up to date. The LEDs cycle through all the colors on all the drives at the same time. The server is running and appears to be ok. I can't fine any reference to this anywhere. Any ideas? Thanks.

1 REPLY
Suman_1978
HPE Pro

Re: ML350 G5 SAS LED's cycling through colors

Hi,

 

In this case I would suggest to perform Array Diagnostics to see if any hard drives need any firmware update.

Also do check if you are running on the latest BIOS firmware.

 

Thanks.