ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350 G6 P410i and sysprep issues

 
Paul_614
Occasional Contributor

ML350 G6 P410i and sysprep issues

Having a problem getting the ML350 G6 with a P410i controller to run sysprep. I have set the sysprep.inf file up so it has the mass storage setting for the controller but when windows goes to load it just reboots.

If you stop it you get the following error:
STOP 0x0000007B INACCESSABLE_BOOT_DEVICE

Any ideas?
1 REPLY
mark q
Regular Advisor

Re: ML350 G6 P410i and sysprep issues

getting the exact same thing here, my image works on anything except something with a p410i

- all firmware up to date
- 3 different drivers
- still bluescreens stop 7xb

calling hp on monday, I know it's not the image because if it was then nothing would work.

I'm running sysprep -mini -pnp -forceshutdown -reseal