ProLiant Servers (ML,DL,SL)
1752778 Members
6328 Online
108789 Solutions
New Discussion юеВ

Re: ML350 G6 too too slow

 
SOLVED
Go to solution
Pepe Rodriguez
Advisor

Re: ML350 G6 too too slow

Thank you Michael,

added as trusted site, I will try to send the file.
Pepe Rodriguez
Advisor

Re: ML350 G6 too too slow

OK, the file is in the message just above this.

I was using Google Chrome, I switch to IE and add site to trust sites.
Michael A. McKenney
Respected Contributor

Re: ML350 G6 too too slow

It is still unavailable.

Do you have room for four new hard drives? I would consider getting four more drives and testing with a RAID 10 array.
Pepe Rodriguez
Advisor

Re: ML350 G6 too too slow

No Michael, I can se the clip and can download the ADU results zip
Michael A. McKenney
Respected Contributor

Re: ML350 G6 too too slow

You could backup the server and reconfigure the array as RAID 10 and test the performance. Other option is add four drives and test in RAID 10, if RAID 10 works better, move the data from four drive RAID 5 to RAID 10 and then create a second RAID 10 array from the RAID 5 drives.
Pepe Rodriguez
Advisor

Re: ML350 G6 too too slow

I just made the order for 4 new disks and will try with RAID 10, but I am afraid because may be another thing is not running fine with this server and keep going slow and it was a lost of money.
Pepe Rodriguez
Advisor

Re: ML350 G6 too too slow

By the way Michael, Thank you very much for your help with this. Could you see my attachment?
Michael A. McKenney
Respected Contributor

Re: ML350 G6 too too slow

Still not downloading. You said 10 MB/s both reads and writes. Are you sure the cache is properly configured? I would still try to get more drives for RAID 10 test. RAID 5 on HP servers can be painfully slow.