ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

ML350 + IDE CD burner low performances

Occasional Visitor

ML350 + IDE CD burner low performances

I installed an IDE CD burner on the primary IDE controler with a 80 conductor cable, and plugged the original CDRom drive on the secondary IDE channel.
I'm running Win2K SP4, installed the latest ASPI drivers and can see and use the CD Burner as a x52 burner.
The problem is that all I can get from the burner is a speed of x12 (CPU is reaching 100 percent during read accesses)
I also have the same poor rates with the CDRom drive.

I tried to install the ATA100 drivers available for ML350 on this site but it won't install...

Do I need to buy an extra ATA100 or ATA133 controler?

Thanks for your help