ML350 Video Issues

[Greg Stanton_2]

Just installed my new ML350 and when it is plugged into the KVM, the video on all channels turned to crap, jumpie, flickers and one chammel has no video. When I unplug the 350 video, all channels are normal. I changed out the VGA cable, no change, tried a different KVM channel, again no difference. Any Ideas?

[Oleg Koroz]

KVM failure? Another KVM?
What brand? COMPAQ/HP? Firmware?
All servers do the same? Or only one?
RILOE board Used, any other Video Controllers?
ML350 G1? Or G X? System ROM Updates?

[Greg Stanton_2]

KVM failure? -No, Works perfect w/o ML350 plugged in. In fact an older ML350 doesn't have this problem.
Another KVM? -Don't have one.
What brand?-
COMPAQ/HP? -THe ML350 is HP
Firmware?-
All servers do the same? No, they work fine.
Or only one? -Just the new ML350
RILOE board Used, any other Video Controllers? -No.
ML350 G1? Or G X? -HP ML350G4 X3.4 HP-SC641 US Rck Server
System ROM Updates?-